BMW Motorcycles BMW of Santa Cruz County
Specifications

Engine
Type Liquid-cooled single-cylinder
Bore x Stroke 100.0 mm x 83.0 mm
Displacement 652 cc
Horsepower 53 bhp @ 7000 rpm
Torque 44 lb/ft @ 5250 rpm
Compression Ratio 11.5:1
Valve Configuration DOHC, chain-driven with bucket tappets
Valves 2 x 36 mm intake / 2 x 31 mm exhaust
Valves/Cylinder Four
Engine Oil Capacity 2.4 quarts
Engine Management BMW Motor Controller - Compact (BMS-C II)
Fuel Requirement Premium Unleaded
Fuel Tank HDPE, internal pump and external filter
Fuel Capacity 2.5 U.S. gallons including 1 gallon reserve
Charging System 280 Watts @ 14 Volts
Battery 12 Volts 10 Amps/hour maintenance-free
Cooling System Single Radiator, 50/50 water/anti-freeze mix


Drivetrain
Primary Drive 1:1.946
Clutch Multiple plate in oil bath
Gear Ratios 1st: 2.75:1
2nd 1.75:1
3rd 1.31:1
4th 1.05:1
5th 0.84:1
Final Drive System Chain
Final Drive Ratio 2.937:1


Frame and Suspension
Frame Steel bridge tubular frame
Front Suspension UPSD fork 45 mm
Front Travel 9.4 inches
Rear Suspension Aluminum two unit cast swing arm, air damping
Rear Travel 8.3 inches
Brakes
Brake System Front and rear disc with optional ABS
Front Brakes One, two-piston caliper
Front Rotor 11.8 inch fixed rotor
Rear Brake One, single-piston floating caliper
Rear Rotor 9.5 inch fixed rotor
Actuation Method Hydraulic, DOT 4 fluid type
Wheels and Tires
Front Wheel 2.50 x 19 wire-spoke
Rear Wheel 3.00 x 17 wire-spoke
Front Tire 100/90 x 19 tube-type
Rear Tire 130/80 x 17 tube-type


Dimensions and Weights
Overall Length 86.0 inches
Overall Width 35.7 inches
Wheelbase 59.0 inches
Ground Clearance Info. Unavailable
Seat Height 33.1 inches
Steering Angle 61.5 degrees
Front Wheel Trail 4.6 inches
Weight - Dry 326 lbs. excluding options & accessories
Weight - Wet 353 lbs. excluding options & accessories
Maximum Load 739 lbs. GVWR


Travel Data
Fuel Consumption* 59.6 mpg


Download spec sheet


*Mile per Gallon (MPG) figures are estimated and derived from the Federal Test Procedure (FTP) which is designed to measure a vehicle's emissions for US EPA exhaust certification. Actual mileage will vary based on several factors including, but not limited to, road conditions, riding style, and cargo and rider weight.